How do you use a Trane thermostat?

How do you use a Trane thermostat?

Manual Control Step 1: Press and hold the ‘System Mode’ button. It will allow you to choose between Heating, Cooling, and Auto. If you choose Auto, the Trane thermostat will operate your HVAC unit as needed to match the input temperature.

How do I reset my Trane thermostat to factory settings?

Here are the steps you need to take to reset your AC thermostat.

1. Shut Down Your AC at the Thermostat.
2. Find Your Circuit Breaker Box.
3. Reset the Circuit Breaker for Your AC Unit.
4. Wait 30 Seconds.
5. Turn the AC Thermostat Back On.
6. Call Vredevoogd Heating & Cooling for all your Furnace & AC needs.

How do I know what model Trane thermostat I have?

Trane sells several types of thermostats with lots of variations. If you are looking for the manual for your specific thermostat, it is crucial that you know the model number. Finding the model number of a thermostat is easy. It should be printed on the back of the face-plate.

Why is my Trane thermostat not working?

Your thermostat/control may be off or set incorrectly. Check temperature setting on thermostat/control. If no change, contact your local Trane Dealer. In the meantime, try turning off your thermostat/control for 1 to 3 hours to see if it will reset itself.

What is permanent hold on Trane thermostat?

Permanent Hold changes the temperature setting until Permanent Hold is cancelled. 1. Press Hold key.

What does ESM mean on Trane thermostat?

It has an Auto mode which automatically switches between heating and cooling, depending on the temperature. It also has an Energy Saving Mode (ESM) with 2 sets of temperature setpoints for when you are home and away. The Trane thermostat Device has one command input terminal and 7 status output terminals.

How do you turn off the schedule on a Trane thermostat?

To cancel the override, press the button under the RUN SCHEDULE on the lower left of the thermostat. Press HOLD next to the directional buttons to clear all schedules in the thermostat. This will allow you to operate the thermostat in a manual mode for longer periods.

How do I reset my programmable thermostat?

A common way to reset almost any thermostat is to hold down the reset button for 5+ seconds. Alternatively, try resetting battery-powered thermostats by flipping the battery directions around for 5s, then flip them back. If all else fails, switch off the power at the circuit breaker for a couple minutes.

How do I read my old Trane model number?

Trane/American Standard

1. Style 1 starts with a letter which represents the manufacturing location and then 2 numbers which is the last 2 digits of the year manufactured (in 2000). For example C12A00152 means Clarksville Plant.
2. Style 2 starts with numbers and the first 2 numbers are the year.