How much is Merbau per sqm

Merbau (140mm wide) costs about $60 per m2.

What is the cost of merbau?

Merbau (140mm wide) costs about $60 per m2.

Is merbau decking expensive?

For instance, if you want a merbau deck, the average price for it is between $280 and $320 per square metre. If the deck is elevated, you’ll need a balustrade in addition, which costs $320 per metre if it’s made of glass, and $180 per metre if it’s made of timber and wire.

How much is hardwood decking per m2?

Composite vs timber decking costs The average cost for a composite deck is between $120 to $200 per square meter for the materials. In comparison, the most common hardwood timber species cost between $60 to $140 per square meter.

Which is more expensive merbau or spotted gum?

The spotted gum is an Australian timber, more expensive, however it doesnt bleed as much as merbau. Merbau on the other hand is cheaper, comes from indonesia, and does bleed.

How do you price a deck?

Deck QualityCost Per Square FootBasic Materials$15Average Materials$25Premium Materials$35

What is the cost of installing a deck?

The average price range of building a new deck in the United States can be anywhere between $4,000 and $11,000. Including materials and labor, a standard deck will cost roughly $30-$60 per square foot. That means, for a standard 14 x 20 foot deck, you can expect to pay around $6,000.

How do you calculate decking for timber?

You do this by taking the length and width of your decking and times them by each other. To find out how many lineal meters you need, take your square meters and divide it by the width of the decking boards.

Is merbau a hardwood?

A beautiful hardwood timber species deriving from a few locations around the world, merbau comes from the Kwila tree. … This hardwood is popular for its unique beauty, often compared to that of jarrah.

Is it cheaper to build your own deck?

For basic deck designs using the least expensive lumber, you can expect to pay from about $8 to $10 per square foot (depending on the material) of deck area if you do the work yourself or pay about $30 per square foot if the material is professionally installed.

Article first time published on

How much does it cost to build a merbau deck?

Paal estimates you can expect to pay: $280 to $320 per square meter for Merbau decking .

Will termites eat Merbau?

Merbau is so tough even termites hate it and want nothing to do with it whatsoever.

Is kwila and merbau the same?

Kwila, also known as Merbau, is a tropical timber which naturally grows in various regions throughout the South East Pacific rim, such as Northern Queensland, Papua New Guinea, Philippines, Solomon Islands, Fiji, Malaysia and Indonesia.

What is the best decking timber to use in Australia?

Hardwoods Hardwoods are a great option for Australian decks – they’re extremely durable, highly resilient and can look, feel and even smell great. Popular hardwoods include Jarrah, Spotted Gum, and Merbau, which is the most common timber decking in Australia.

What is the best decking wood?

If you are on a budget, the best woods you can use are Cedar and Redwood. While pine is less durable, it still is a cheaper, viable and reliable option. However, if you want a stronger, more durable, and longer-lasting wood decking, the better ones are softwoods.

Is Bunnings Merbau sustainable?

By securing a consumer market for sustainably managed merbau, Bunnings provided the local population with an alternative to illegal logging or conversion of the forest to other land uses. The Forest Stewardship Council (FSC) standards are independently audited, globally recognised, and scientifically sound.

How do you estimate a decking job?

Labor costs will total just about two-thirds of the total project cost. With contractors charging, on average, about $35 per square foot. For an average deck size between 200 and 500 square feet, you can expect to pay out between $7,000 and $17,000 just for installation and labor.

How much does a deck add to home value?

Wooden Deck value report that, on average, homeowners spend just over $16,000 to add new wooden decks, but only see the resale value of their homes increase by $11,000, which is about 66% in recouped costs. Though, if restoring a wood deck is an option, it can be a smart investment.

What is the labor cost to build a deck?

Labor Cost to Build a Deck A deck can significantly increase the value of your home. However, labor is a significant aspect of the total cost. The cost of labor to build a deck ranges from $8 to $22 per square foot.

How much does a 10x20 deck cost?

DimensionsTotal Square FeetAverage Price Range10x20200$8,000 – $12,00012×20240$9,600 – $14,40016×16256$10,240 – $15,36014×20280$11,200 – $16,800

What material do I need for a 12x12 deck?

You will need 18 boards of 2-by-6-inch lumber or nine 2-by-10 inch boards to build the joists, also known as the beams. You should purchase an additional 25 percent wood to allow for framing pieces and waste.

Does a deck add square footage to a home?

If you can enclose a deck, add heating and make it feel like another part of the house, it could be considered as additional square footage. The foundation for the deck must meet code in order for the work to take place, so checking with a building official is vital before starting a project.

Does Merbau go GREY?

Answer: Merbau decking won’t bleed on its own. … The alternative is to leave the decking for some months so the tannin can wash out naturally, but in the process it will start to lose its colour and turn grey.

Does Merbau need to be oiled?

While merbau is one of the timbers that contains an abundance of natural essential oils that keep it organically preserved, the benefit of treating it further with oils is that the oils will replace the natural ones as time goes on, and allow the timber decking to further thrive.

Is Merbau native to Australia?

Merbau grows naturally in South East Asia, the Philippines, Solomon Islands, Fiji and Papua New Guinea and is imported to Australia from these countries. Merbau grows in Australia in a specific region by the Johnstone River and in the Daintree area of Far North Queensland.

How do I calculate decking materials?

Step 1: Calculate the surface area of your decking. Multiple the length (L) of your decking area by the width (W). …
Step 2: Calculate the coverage of your deck boards. Add the deck board width (W) to the Expansion Gap Length (EGL). …
Step 3: Calculate the number of boards required.

What is merbau timber?

Merbau is a South East Asian rainforest hardwood that is also known as Kwila. It is a durable, dark reddish brown timber that is high in tannin content. Merbau may require repeat applications of Intergrain UltraPrep Timber Cleaner prior to coating. It is commonly used for decking, fences, flooring and panelling.

How do you work out the square meter of a deck?

Start by working out the area of your desired decking area in square metres. To do this simply measure the area in metres and multiply the width by the depth. If the area you are decking is not a simple rectangle then you will need to divide it into ‘rectangles’ and calculate each area individually.

What is the cheapest way to build a deck?

Choose wood, but carefully: Untreated wood decks are generally the cheapest to install, but don’t forget long-term costs. Wood decks require yearly maintenance and deteriorate quickly if they don’t get it.

What is a good deck size?

Most builders suggest that your deck should be no larger than 20 percent of the house’s* square footage. This is so that the deck does not overwhelm a home visually. This, of course, is up to you. If you feel you need a larger deck that takes up more of your yard space, feel free!

What is the cheapest material to build a deck?

Pressure-treated wood, or chemical-treated wood, decks are generally the cheapest material to build decks with.