What kind of ink does a Canon MG3222 use?

What kind of ink does a Canon MG3222 use?

Canon PG-240XL
The Canon Pixma MG3222 uses Canon PG-240XL and Canon CL-241XL ink cartridges.

How do I change the ink in my Canon MG3222 printer?

Turn the printer ON, and open the front cover (C), and the paper output tray (D) (see slide images below).

1. Open the paper output cover (E).
2. Push down the ink cartridge lock lever until it clicks.
3. ​Remove the ink cartridge.
4. Take a new ink cartridge out of its package and gently remove the protective tape (G) .

What ink is compatible with Canon 3322?

Compatible ink for Canon PIXMA TS3322 The Canon PIXMA TS3322 uses the Canon PG-245XL and CL-246XL ink cartridges.

How do I reset my Canon MG3222 printer?

To reset (initialize) the LAN settings to the factory defaults, press the (Maintenance) button until appears. Then, press the Black or Color button. This symbol will appear after pressing the button 17 times.

How do I connect my Canon 3222 printer to WIFI?

Set Up Wirelessly Using WPS – PIXMA MG3220 / MG3222

1. Turn the printer ON and make sure the power lamp. is lit.
2. Press and hold the Maintenance button. on the printer for about 5 seconds.
3. Press the Fit to Page button.
4. Press and hold the WPS button on the access point (about 5 seconds).

How do you replace ink cartridges in a Canon printer?

Replace or reseat ink cartridges

1. Turn the printer on and open the front cover (C).
2. The paper output tray (D) opens.
3. Remove any paper in the cassette.
4. Open the paper output cover.
5. The cartridge holder (E) moves to the replacement position.
6. Push down on the cartridge until it clicks.
7. Remove the cartridge.

How do I change the ink in my Canon e410?

When ink runs out, replace the FINE cartridge immediately with a new one.

1. Make sure that the power is turned on.
2. Retract the paper output tray and the output tray extension.
3. Open the cover.
4. The FINE cartridge holder moves to the replacement position.
5. Remove the empty FINE cartridge.
6. Prepare a new FINE cartridge.

How do I make my Canon MG3222 discoverable?

How do I make my Canon printer discoverable?

WPS Connection Method

1. Make sure that the printer is turned on. Press & hold the [Wi-Fi] button on the top of the printer until the alarm lamp flashes once.
2. Make sure that the lamp next to this button starts to flash blue and then go to your access point and press the [WPS] button within 2 minutes.